- 500 ohm impedance
- Frequency Response: 50 – 15000 Hz
- 2.2 mV/Pa sensitivity
- Heavy duty paging microphone
AVAILABILITY: In stock
- ABA-5000 has a built-in Bi-Amplifier for woofer and HF driver separately, for use in a wide variety of Professional and PA Programmes. Feature packed ABA-5000 is an ideal equipment for applications such as in Professional Music and Vocal Performances, Touring PA, Mini-Theatres, Pubs and Bars, Religious Gatherings, Stage Monitors etc.
- 1xBalanced Mic/Line Input selectable through a push switch.
- 1xLine Input can be used for connecting balanced MONO signal through jack or unbalanced STEREO signal source through dual RCA.
- Switchable balanced output either as a Loop through output of Input-1 or a mix output of Input-1 and 2.
- Balanced output to link another ABA-5000 or for recording on a computer, record player.
- 2-Way Speaker System: 15” LF Woofer (Ø3.0” voice coil) + Dynamic Horn (Ø1.75” voice coil).
- Moulded Cabinet Bi-Amp PA Acitve Loudspeaker.
AVAILABILITY: In stock
- Attractive and versatile high performance single channel UHF wireless microphone available in different frequencies.
- Bodypack receiver has built-in 6.3mm (¼”) jack plug which provides unbalanced audio output.
- Volume control knob with RF & POWER LED on the front side of the receiver.
- One handheld dynamic transmitter, operating on 2 × 1.5V AA pencil cells.
- Receiver has a three position slide switch for ON/STANDBY/OFF position and operates on 2 × 1.5V AA pencil cells.
- Ideal for: PA Applications… Stage & Auditoriums… Stadia… Seminar Halls… Places of Worship… Recreation Centres…
AVAILABILITY: In stock
- Rugged, reliable and easy to operate 3-channel DJ mixer.
- Three MIC inputs alternate to three stereo LINE/CD inputs.
- MIC-1 is balanced XLR input with TALKOVER priority over other inputs.
- Each channel has a GAIN control, 3 band active EQ, MIC-LINE selector switch, CUE ON/OFF switch and channel fader control.
- Ultra smooth slide control for CROSSFADER function.
- Slide switch for selecting the desired crossfade curve i.e. Flat or Steep.
- Master, Booth and Rec stereo outputs through RCA socket.
- Mono Subwoofer output with two frequencies of 120 & 180Hz.
- Stereo headphone output with CUE volume control.
- CUE MIX switch for selecting between BLEND & SPLIT function.
- Independent volume controls for MASTER, BOOTH, SUB and CUE outputs.
- Individual 12 segment LED array for indicating LEFT & RIGHT output levels.
AVAILABILITY: In stock
- AFT-24F2 is a dual channel automatic feedback suppression unit. This feature packed signal processor is designed to provide fast and accurate feedback control in fixed installations as well as live shows.
- 24 digital notch filters and LED indicators for each channel.
- Electronically balanced inputs and outputs available through XLR connectors and 6.3mm (1/4”) stereo phone sockets.
- Each channel has a control for selecting the filter width between 1/80th and 1/5th octave.
- Dual input sensitivity of -10dBV and +4dBu is provided for each channel, which is individually selectable through push switches.
- Each channel has separate push switch for choosing between three modes of operation – Bypass/ Setup/Live.
- Provision of a Lock switch on rear panel enables the user to keep its settings intact during a program.
- Four segment LED indicator and a Clip LED for each channel.
AVAILABILITY: In stock
- High quality, professional 2-channel, 31-band graphic equalizer for accurate tuning of the frequency response, and feedback control. Highly effective for enhancing the audio experience of any sound installation. Ideal for a wide variety of PA and Pro Audio applications.
- Two independent 31 band graphic equalizers in 1/3 octave Constant Q frequency bands.
- Switchable cut/boost range of 6dB and 12dB. Low-cut filter ON/OFF switch for each channel.
- Equalizer bypass switch easily accessible on front panel.
- Input control has a gain range from -12dB to +12dB.
- Four segment LED indicator for monitoring output levels and a Clip LED for each channel.
- Accepts line level balanced inputs through XLR as well as 6.3mm (1/4”) stereo phone sockets.
AVAILABILITY: In stock
- Upper mid-range presence peak for intelligible sound and ideal for close-to-lip singing. Accentuates warmth and clarity.
- Supplied with quick detachable holder with 3-pin professional XLR connector & 10 mtrs. twin core shielded low noise cable.
AVAILABILITY: In stock
- High output neodymium cartridge, excellent intelligibility & wide frequency response.
- Ideal for live vocal, music & studio applications.
- Supplied with quick detachable holder with 3-pin professional XLR connector & 10 mtrs. twin core shielded low noise cable.
AVAILABILITY: In stock
- Rugged & reliable microphone with superb speech quality and excellent finish.
- Chiselled mic body to obtain anti-roll design. Ideal for live vocals and all type of PA applications.
- Supplied with quick detachable holder with 3-pin professional XLR connector & 10 mtrs. twin core shielded low noise cable.
AVAILABILITY: In stock
- Elegant & affordable high performance dual channel wireless microphone available in eight pairs of frequencies.
- Separate volume control for both channels on the front panel of the receiver.
- Two handheld dynamic transmitters, each operating on 2 × 1.5V AA pencil cells
- Separate balanced audio output from each channel and an unbalanced mixed output available from the receiver.
- Receiver operates on 12V DC through an AC adaptor.
AVAILABILITY: In stock
- Elegant & affordable high performance single channel UHF wireless microphone available in different frequencies.
- Sturdy table-top receiver with frequency display.
- Volume control knob on the front panel of the receiver.
- One handheld dynamic transmitter, operating on 2 × 1.5V AA pencil cells.
- Separate balanced output through XLR connector and an unbalanced output through 6.3mm (¼”) jack socket is available from the receiver.
- Receiver operates on 12V DC through an AC adaptor supplied along with the transmitter.
- Ideal for: PA Applications… Stage & Auditoriums… Stadia… Seminar Halls… Places of Worship… Recreation Centres…
AVAILABILITY: In stock
- Elegant and stylish looking plastic moulded cabinet PA Amplifier Set with Trolley System.
- Two Mic inputs, Two Wireless Mics, one Aux input & one Music input. Mic1 has selectable priority over all other inputs.
- Built-in 203 mm (10”) 4Ω speaker & 8Ω HF driver.
- Built-in MP3 Player with Bluetooth, Recorder, SD Card and Remote Control. Built-in Digital Echo effects.
- Tone control for setting the desire tonal quality.
- LED indications for low battery, charging & clip output. Auto cut-off feature prevents battery deep discharge.
- Operates on AC mains, external 12V DC or built-in 12V 7Ah rechargeable battery.
AVAILABILITY: In stock
- Compact and Lightweight Megaphone. Ergonomic Design – Easy to Hold & Carry. Transparent Horn.
- All ABS Body – Sturdy but Light Weight. High Efficiency & Clear sound.
- Pencil cells AA type (6×UM-3) used.
- Microphone with volume control and Push type ON/OFF Switch.
- Power ON LED indication provided.
AVAILABILITY: In stock
High quality flush mount ceiling speaker with stylish grill and frame, which integrate wonderfully well with all interiors. Clear and clean sound for speech and music.
- 8″ Dual Cone Full Range Speaker, 15W/100V.
- High fidelity and excellent frequency response.
- 100V line operation with easy power tap selection through a terminal block.
- Superbly engineered for simple and safe installations.
- CS-8151T is a right choice for HIGH CEILINGS.
- Ideal for Offices… Restaurants… Hotel… Hospitals… Shopping Malls… Gymnasiums…
AVAILABILITY: In stock
- Sleek & compact 8-channel line signal splitter suitable for various large installations & PA applications. Recommended for use when a single programme source has to feed several amplifiers. Avoids signal loading and related distortion problems.
- Accepts line level Stereo/Mono input.
- Provides four line level stereo outputs or eight line level mono outputs.
- Individual volume controls for input and eight output channels.
- Clip LED for setting optimum distortion free input levels.
- Operates on AC mains and 24V DC Car Battery.
- 19” rack mountable in 1U space and also usable as a table top unit.
AVAILABILITY: In stock
- Compact and rugged professional line level signal splitter.
- Designed for use in a wide variety of indoor and outdoor PA applications.
- Accepts Line Level Stereo as well as Mono inputs through F/XLR connector as well as 6.3mm (1/4”) stereo phone jack sockets.
- Provides four stereo balanced outputs or eight mono balanced outputs through M/XLR connectors.
- Individual volume control for each input & output channel.
- Separate clip LED indicator for Left and Right input signal.
- Easy to operate Stereo/Mono push switch, provided on front panel.
- Operates on AC mains.
- 19” rack mountable in 1U size and usable as a table top unit also.
AVAILABILITY: In stock
